Forced Performance DSM Flanged 68HTA 6851S Turbo 58mm CH8CM Turbine External WG
DSM 6851S68HTA V3 EXTERNAL WASTEGATE 2019010
The Forced Performance 6851S for DSM is the quickest spooling turbo we've ever produced for the DSM platform. With the UHF™ 51S turbine wheel in an 8CM MHI turbine housing, it fits like stock and has mind blowing response. The 68 HTA compressor wheel has been known to make great power for years now, and we love it with this setup. Available with or without an actuator, this is sure to be a great street turbo that can flow 51 lbs/min.
This turbo is available either with an 18psi internal wastegate or set up for an external wastegate off the o2 housing.
Attention: All Forced Performance turbochargers are built to order to your exact specifications and should not be considered on the shelf ready to ship unless specifically noted on the work order. Build times vary by model of turbo and options of said turbocharger, therefore we cannot guarantee a delivery date or ETA.
- Compressor wheel - 68HTA
- Flow rating - 51LB per minute
- CW Measurements - 51.2MM Inducer / 68MM Exducer
- TW Measurements - 60.8MM Inducer / 54MM Exducer
- Compressor Housing - 16G TD05H (56mm)
- Turbine Housing - FP 8CM
- CHRA - FP Journal Bearing
- Oil Line - Not Included
The FP 68HTA™ Turbocharger for DSM flanged vehicles out flows both the E3 16G and 18G wheels and allows for higher PR operation without increased compressor outlet temperatures like the existing 16G and 18G wheels. Mass flow is increased to a whopping 51lb/min which is several lb/min greater than either the E3 16G or the 18G wheels are capable. To maximize its power potential this turbo comes standard with a 8CM turbine housing.
Attention: All Forced Performance turbochargers are built to order to your exact specifications and should not be considered on the shelf ready to ship unless specifically noted on the work order. Build times vary by model of turbo and options of said turbocharger, therefore we cannot guarantee a delivery date or ETA.
